Contents
- Z Pile Sheets
- Angles
- Channels
- I Beams
- H Beams
- Bright Bars
- Metal Crash Barriers
- W Beams
- Thrie Beams
- Lightning High Mast
- Galvanised Barbed Wire
Z Pile Sheets
About
Z shaped Piles were produced in Europe as early as 1911. These Piles followed the wave-shaped Larssen concept, with the advantage that the interlocks were formed on the outer elements of the Pile. Inter Trade offers a comprehensive range of Z Profile Steel Sheet Piles.
Specifications
| Type | S=Single D=Double |
Thickness | Single pile c/c Width(W) mm |
Height | Weight | Moment of Inertia (I) cm^4 | Section Modulus(s) cm^2 | |
| 1 | ITZ07C | Per S | 7 | 400 | 185 | 41.2 | 2926.8 | 325 |
| Per D | 800 | 82.4 | 5853.7 | 650 | ||||
| Per m of wall | 103.0 | 7317.1 | 813 | |||||
| 2 | ITZ08C | Per S | 8 | 400 | 185 | 46.8 | 3290.6 | 366 |
| Per D | 800 | 93.7 | 6581.2 | 732 | ||||
| Per m of wall | 117.1 | 8226.5 | 915 | |||||
| 3 | ITZ10A | Per S | 10 | 850 | 200 | 92.9 | 856.2 | 787 |
| Per D | 1700 | 185.8 | 1712.4 | 1573 | ||||
| Per m of wall | 109.3 | 1007.3 | 925 | |||||
| 4 | ITZ601 | Per S | 6 | 690 | 390 | 51.3 | 16944.6 | 869 |
| Per D | 1380 | 102.6 | 33904.0 | 1739 | ||||
| Per m of wall | 74.3 | 24568.1 | 1260 | |||||
| 5 | ITZ801 | Per S | 8 | 690 | 390 | 68.3 | 22347.9 | 1146 |
| Per D | 1380 | 136.5 | 44714.2 | 2293 | ||||
| Per m of wall | 98.9 | 32401.6 | 1662 | |||||
| 6 | ITZ802 | Per S | 8 | 695 | 392 | 68.6 | 22723.4 | 1159 |
| Per D | 1390 | 137.3 | 45474.0 | 2321 | ||||
| Per m of wall | 98.8 | 32715.1 | 1669 | |||||
| 7 | ITZ101 | Per S | 10 | 690 | 390 | 85.1 | 27579.9 | 1414 |
| Per D | 1380 | 170.2 | 55182.1 | 2830 | ||||
| Per m of wall | 123.3 | 39987.0 | 2051 | |||||
| 8 | ITZ102 | Per S | 10 | 695 | 392 | 85.6 | 28045.4 | 1431 |
| Per D | 1390 | 171.1 | 56123.8 | 2863 | ||||
| Per m of wall | 123.1 | 40376.8 | 2060 | |||||
| 9 | ITZ121 | Per S | 12 | 695 | 392 | 103.4 | 33267.8 | 1697 |
| Per D | 1390 | 206.8 | 66584.1 | 3397 | ||||
| Per m of wall | 148.8 | 47902.2 | 2444 |
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
Angles
About
Angle steel is rolled at a 90-degree angle to form an L-shaped cross-section. Angle is used to form frames, corners and supports for structural applications of all types. Equal-leg angle has sides of equal width through the length of the material.
Specifications
| Dimensions (mm) | Section Wt. (kg/mtr) | Length (mtr) | |
| 1 | 40 x 40 x 4 / 5 / 6 | 2.4 / 3.0 / 3.5 | 6 to 13 |
| 2 | 45 x 45 x 4 / 5 / 6 | 2.7 / 3.4 / 4.0 | 6 to 13 |
| 3 | 50 x 50 x 4 / 5 / 6 | 3.0 / 3.8 / 4.5 | 6 to 13 |
| 4 | 55 x 55 x 4 / 5 / 6 | 3.3 / 4.1 / 4.9 | 6 to 13 |
| 5 | 60 x 60 x 4 / 5 / 6 / 8 | 3.7 / 4.5 / 5.4 / 7.0 | 6 to 13 |
| 6 | 65 x 65 x 6 / 8 | 5.8 / 7.7 | 6 to 13 |
| 7 | 75 x 75 x 6 / 8 / 10 | 6.8 / 8.9 / 11.0 | 6 to 13 |
| 8 | 90 x 90 x 6 / 8 / 10 / 12 | 8.2 / 10.8 / 13.4 / 15.8 | 6 to 13 |
| 9 | 100 x 100 x 6 / 8 / 10 / 12 | 9.2 / 12.1 / 14.9 / 17.7 | 6 to 13 |
| 10 | 110 x 110 x 8 / 10 / 12 | 13.4 / 16.6 / 19.7 | 6 to 13 |
| 11 | 130 x 130 x 10 / 12 / 16 | 19.7 / 23.5 / 30.7 | 6 to 13 |
| 12 | 150 x 150 x 10 / 12 / 16 / 20 | 22.9 / 27.3 / 35.8 / 44.1 | 6 to 13 |
| 13 | 200 x 200 x 16 / 20 / 25 | 48.5 / 60.0 / 70.8 | 6 to 13 |
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
Channels
About
Channel consists of a flat web with two formed 90-degree sides that form a C-shape. Channel classified as Standard has an approximately 16-2/3% slope on the inner flange surface and can be used as framework or supports for machines, trailers, rail cars, bridges, and buildings.
Specifications
| Dimensions (mm) | Section Wt. (kg/mtr) | Length (mtr) | |
| 1 | 75 x 40 | 7.14 | 6 to 13 |
| 2 | 100 x 50 | 9.56 | 6 to 13 |
| 3 | 125 x 65 | 13.1 | 6 to 13 |
| 4 | 150 x 75 | 16.8 | 6 to 13 |
| 5 | 175 x 75 | 19.6 | 6 to 13 |
| 6 | 200 x 75 | 22.3 | 6 to 13 |
| 7 | 250 x 82 | 34.2 | 6 to 13 |
| 8 | 300 x 90 | 36.3 | 6 to 13 |
| 9 | 400 x 100 | 50.1 | 6 to 13 |
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
I Beams
About
I-beams are widely used in the construction industry and are available in a variety of standard sizes. Tables are available to allow easy selection of a suitable steel I-beam size for a given applied load. I-beams may be used both as beams and as columns.
Specifications
| Dimensions (mm) | Section Wt. (kg/mtr) | Length (mtr) | |
| 1 | 125 x 65 | 13.3 | 6 to 13 |
| 2 | 150 x 75 | 15.0 | 6 to 13 |
| 3 | 175 x 85 | 19.6 | 6 to 13 |
| 4 | 200 x 100 | 24.2 | 6 to 13 |
| 5 | 225 x 110 | 31.1 | 6 to 13 |
| 6 | 250 x 125 | 37.3 | 6 to 13 |
| 7 | 300 x 140 | 46.0 | 6 to 13 |
| 8 | 350 x 140 | 52.4 | 6 to 13 |
| 9 | 400 x 140 | 61.5 | 6 to 13 |
| 10 | 450 x 150 | 72.4 | 6 to 13 |
| 11 | 500 x 180 | 86.9 | 6 to 13 |
| 12 | 600 x 210 | 123.0 | 6 to 13 |
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
H Beams
About
H-beam steel, which is named after the alphabet “H” because its cross-section shape is similar to this letter, is an economical section steel with more optimized section area distribution, more reasonable strength-to-weight ratio.
Specifications
| Dimensions (mm) | Section Wt. (kg/mtr) | Length (mtr) | |
| 1 | 100 x 100 | 20.0 | 6 to 13 |
| 2 | 150 x 150 | 27.1 | 6 to 13 |
| 3 | 152 x 152 | 37.1 | 6 to 13 |
| 4 | 200 x 200 | 60.3 | 6 to 13 |
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
Bright Bars
About
Bright Bars are steel or metal bars that are produced by one or more cold finishing processes. The processes outlined below are known as Cold Finish processes or the the end products are known as cold finished because there is no or very little heat applied in the entire operation of converting them from hot rolled bars (also known as black bars) to cold finished bars or Bright Steel Bars.
Specifications
| Rounds | Flats | Squares | Hexagons | |||||||
| MM | Inch | MM | MM | Inch | Inch | MM | Inch | MM | Inch | |
| 1 | 6 | 3/8" | ||||||||
| 2 | 12 | 1/2" | 25 x 6 | 40 x 25 | 3/4" x 1/2" | 2-1/2" x 3/8" | 12 | 1/2" | 16 | 5/8" |
| 3 | 14 | 5/8" | 25 x 8 | 40 x 30 | 1" x 1/4" | 2-1/2" x 1/2" | 14 | 5/8" | 17 | 3/4" |
| 4 | 15 | 11/16" | 25 x 10 | 40 x 32 | 1" x 3/8" | 2-1/2" x 5/8" | 16 | 3/4" | 18 | 7/8" |
| 5 | 16 | 3/4" | 25 x 12 | 50 x 6 | 1" x 1/2" | 2-1/2" x 3/4" | 20 | 7/8" | 19 | 1" |
| 6 | 18 | 7/8" | 25 x 15 | 50 x 8 | 1" x 5/8" | 2-1/2" x 1" | 22 | 1" | 22 | 1-1/8" |
| 7 | 20 | 1" | 25 x 16 | 50 x 10 | 1" x 3/4" | 2-1/2" x 1-1/4" | 24 | 1 1/8" | 24 | 1-1/4" |
| 8 | 22 | 1-1/8" | 25 x 20 | 50 x 12 | 1-1/4" x 1/4" | 2-1/2" x 1-2/2" | 25 | 1 1/4" | 27 | 1-1/2" |
| 9 | 25 | 1-1/4" | 30 x 12 | 50 x 16 | 1-1/4" x 3/8" | 3" x 3/8" | 26 | 1 1/2" | 28 | 1-3/4" |
| 10 | 28 | 1-3/8" | 30 x 16 | 50 x 20 | 1-1/4" x 1/2" | 3" x 1/2" | 28 | 1 3/4" | 30 | 2" |
| 11 | 30 | 1-1/2" | 30 x 20 | 50 x 25 | 1-1/4" x 5/8" | 3" x 5/8" | 30 | 2" | 32 | |
| 12 | 32 | 1-5/8" | 30 x 25 | 50 x 30 | 1-1/4" x 3/4" | 3" x 3/4" | 32 | 2 1/4" | 36 | |
| 13 | 36 | 1-3/4" | 32 x 6 | 50 x 32 | 1-1/4" x 1" | 3" x 1" | 36 | 2 1/2" | 40 | |
| 14 | 38 | 1-7/8" | 32 x 10 | 50 x 40 | 1-1/2" x 1/4" | 3" x 1-1/2" | 40 | 41 | ||
| 15 | 40 | 2" | 32 x 12 | 51 x 38.3 | 1-1/2" x 3/8" | 4" x 1/2" | 45 | 46 | ||
| 16 | 42 | 2-1/8" | 32 x 16 | 60 x 40 | 1-1/2" x 1/2" | 4" x 5/8" | 50 | 50 | ||
| 17 | 45 | 2-1/4" | 32 x 20 | 75 x 10 | 1.1/2" x 3/4" | 4" x 1" | 60 | 55 | ||
| 18 | 50 | 2-1/2" | 32 x 25 | 75 x 12 | 1-1/2" x 1" | 34" x 1-1/4" | 63 | |||
| 19 | 56 | 3" | 35 x 8 | 75 x 16 | 1-1/2" x 1-1/4" | 4" x 1-1/2" | ||||
| 20 | 60 | 3-1/4" | 35 x 15 | 75 x 20 | 2" x 1/4" | |||||
| 21 | 65 | 3-1/2" | 35 x 25 | 75 x 25 | 2" x 3/8" | |||||
| 22 | 70 | 4" | 40 x 6 | 80 x 25 | 2" x 1/2" | |||||
| 23 | 75 | 40 x 8 | 100 x 20 | 2" x 5/8" | ||||||
| 24 | 80 | 40 x 10 | 2" x 3/4" | |||||||
| 25 | 85 | 40 x 12 | 2" x 1" | |||||||
| 26 | 90 | 40 x 16 | 2" x 1-1/4" | |||||||
| 27 | 95 | 40 x 20 | 2" x 1-1/2" | |||||||
| 28 | 100 | |||||||||
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
Metal Beam Crash Barrier
W Beam
Wide Flange beams have flanges that are nearly perpendicular to the web of the material unlike the traditional I-Beam. Wide Flange can be found in many structural applications such as bridges and buildings. Inter Trade offers many different sizes, lengths and specifications for Wide Flange Beams:
- Single Side Single Barrier
- Single Side Double Barrier
- Double Side Single Barrier
- Double Side Double Barrier
| Specifications |
| • Cold Roll formed in thickness 3mm / 2.8mm / 2.67mm |
| • Raw materials conforming to IS 5986 / 2062 / 10748. |
| • Fe360 / Fe410 / Fe510 |
| • Hot deep galvanised to 550 gsm / sq. m |
| • Overall length 4318mm / 3318mm / as per customised drawing. |
| • Effective Length: 4000mm / 3000mm |
| • Width: 311mm |
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
Thrie Beam
The Thrie Beam features a triple wave shape, which has an added corrugation compared to the traditional W-beam. Compared to two-wave shape products, this design has a stronger construction and higher impact endurance.
- Single Side Single Barrier
- Single Side Double Barrier
- Double Side Single Barrier
- Double Side Double Barrier
| Specifications |
| • Thickness 3mm / 2.8mm / 2.67mm |
| • Raw materials conforming to IS 5986 / 2062 / 10748. |
| • Hot deep galvanised to 550 gsm / sq. m |
| • Overall length 4318mm / 3318mm / as per customised drawing. |
| • Effective Length: 4000mm / 3000mm |
| • Width: 506mm |
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
Lightning High Mast and Poles
About
MATERIAL: Shaft-High tensile sheet/Plate Equivalent to BSEN 10025 : 2004 / IS 2062 : 2011 Gr.E35OBR / IS 5986 : 2011 Gr. 355, Base Plate- As per IS 2062 : 2011 Gr.E250A, Foundation Bolt- IS 1367 : 1994 / IS 2062 : 2011 Gr.E250A
GALVANIZING: As Per IS 4759 : 1996 / IS 2629 : 1985 / BSEN ISO 1461 : 2009
WIND SPEED: As per IS 875 (Part 3): 2015 / As per customer requirement
DESIGN: As per IS 875 Part-3:2015, IS 800 : 2007 / IS 6533 : 1989 (P-2) / BS 5649 : 1985 / EN 40, ILE TR-7:2000,
WELDING: As per IS 10178 : 1995 / IS 9595 : 1996
DESIGN SAFETY FACTOR: As per ILE TR 7 : 2000
Specifications
| Name | Description |
| Lightning Mast | Manufacturing range from 10m to 40m |
| Street Lightning Pole | Manufacturing range starts from 3m and can be manufactured as required by the customer and location. |
| Decorative Lightning Pole | The manifacturing range starts from 3m and can be manufatured as per customers' requirements. |
| Camera Pole | Can be manufactured as per Customers' requirements. |
| Distrubution Pole | Can be manufactured as per Customers' requirements. |
| Flat Mast | Manufactured as per Customers' requirements. |
| Smart Pole | Can be designed as per technological requirement with arrangement for fixing all types of electrical and electronic devices. |
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
Galvanised Barbed Wires
About
Galvanized steel wire is a versatile wire that has undergone the chemical process of galvanization. Galvanization involves coating stainless steel wire with a protective, rust-preventive metal, such as zinc. Galvanized wire is strong, rust-resistant and multi-purposeful. It also comes in a variety of gauges.
If you are finding the best and effective fencing solution at an affordable cost, then you have to use barbed wire fencing to protect your property from unauthorized entry. Barbed wire or bob wire is a type of fencing wire made of steel. It constructed with sharp metal edges or any sharply pointed materials, which are arranged at intervals along the strands.
Wire Gauge Chart
| Gauge | Inches | Equivalent (mm) | Gauge | Inches | Equivalent (mm) |
| 8 | 0.16" | 4.06 | 27 | 0.0164" | 0.417 |
| 9 | 0.144" | 3.66 | 28 | 0.0148" | 0.376 |
| 10 | 0.128" | 3.25 | 29 | 0.0136" | 0.345 |
| 11 | 0.116" | 2.95 | 30 | 0.0124" | 0.315 |
| 12 | 0.104" | 2.64 | 31 | 0.0116" | 0.295 |
| 13 | 0.092" | 2.34 | 32 | 0.0108" | 0.274 |
| 14 | 0.08" | 2.03 | 33 | 0.01" | 0.254 |
| 15 | 0.072" | 1.83 | 34 | 0.0092" | 0.234 |
| 16 | 0.064" | 1.63 | 35 | 0.0084" | 0.213 |
| 17 | 0.056" | 1.42 | 36 | 0.0076" | 0.193 |
| 18 | 0.048" | 1.22 | 37 | 0.0068" | 0.173 |
| 19 | 0.04" | 1.02 | 38 | 0.006" | 0.152 |
| 20 | 0.036" | 0.91 | 39 | 0.0052" | 0.132 |
| 21 | 0.032" | 0.81 | 40 | 0.0048" | 0.122 |
| 22 | 0.028" | 0.71 | 41 | 0.0044" | 0.112 |
| 23 | 0.024" | 0.61 | 42 | 0.004" | 0.102 |
| 24 | 0.022" | 0.60 | 43 | 0.0036" | 0.091 |
| 25 | 0.02" | 0.51 | 44 | 0.0032" | 0.0081 |
| 26 | 0.018" | 0.46 | 45 | 0.0028" | 0.071 |
* Note that our products are totally customizable according to the client's needs. The above are just some standard measurements
Miscellaneous
We supply and export a wide range of other steel products which can be customized on the basis of shape, size, colour, dimensions and design.
| • 2575 Steel J Hook | • Flat Washer | • Fuel House Clips | • Gald Square Washers |
| • Round Flatwasher | • Spring Washer | • Standard Eyelet | • Curved Washers |
| • Medium Split Lock Washer | • Nickle Alloy Nut n Bolt | • Pu Bolt | • Reinforcing Strap |
| • Nut | • Washer |